4.14 Electric Stretcher—Power Cord Assembly
Chapter 4: Removal, Replacement, and Adjustment Procedures
Replacement
1.
Install the new power cord assembly through the bottom of the electric box.
Figure 4-20. Electric Stretcher Power Cord Assembly
4
2.
Install (loosely) the strain relief (A) to attach the power cord assembly (B)
to the electric box.
3.
Install the terminals into the power cord assembly connector housing.
4.
Connect the power cord assembly connector (G) to P5 on the control board
(H) (see figure 4-17 on page 4-32).
5.
Tighten the strain relief (A) firmly in position (see figure 4-20 on page
4-39).
6.
Install the ground screw (D), the ground strap (E), and the self-locking
nut (C) to the electric box.
7.
Install cable ties to attach the power cord assembly to the other wiring
assemblies inside the electric box.
8.
Put the electric box cover (C) in position, and install the two screws (A) to
attach the cover (C) to the frame (see figure 4-16 on page 4-31).
Hill-Rom® Transport, Procedural, and Specialty Stretchers
Page 4 - 39
Service Manual (144386 REV 2)
Содержание P8000
