Hill-Rom P8000 Скачать руководство пользователя страница 42

Страница: 42 / 444

Specific Function Checks—Procedural Stretcher
Chapter 2: Troubleshooting Procedures

Specific Function Checks—Procedural Stretcher

Knee Section (Optional)—Procedural Stretcher Only

Turn the knee crank handle. The knee section rises and lowers evenly
without binding.

Yes

↓

→

Go to page 2-21.

Auto Contour™ Feature (Optional)—ON and Off (serial
numbers (S/N) before those that start with K)

Lower the back section to the flat position, and make sure the lever for the
Auto Contour™ feature lever is in the

position. Use the right-side

handle to raise the back section. The back section moves evenly to the high
position without binding, and the knee section rises.

Yes

↓

→

Go to page 2-29.

Do step 2 for the handle on the left side of the stretcher.

Lower the head section to the flat position, and make sure the lever for the
Auto Contour™ feature lever is in the

Off

position. Use the left-side

handle to raise the head section. As the head section rises, the seat section
lowers slightly and the knee section rises slightly.

Yes

↓

→

Go to page 2-29.

5. Do step 2 for the handle on the right side of the stretcher.

Auto Contour™ (S/Ns that start with K and after) and
BackSaver Fowler® Features (Optional)

Use the right-side handle to raise the head section. As the head section
rises, the seat section lowers slightly and the knee section rises slightly.

Yes

↓

→

Go to page 2-30.

Do step 6 for the handle on the left side of the stretcher.

Go to “Final Actions” on page 2-11.

Page 2 - 6

Hill-Rom® Transport, Procedural, and Specialty Stretchers

Service Manual (144386 REV 2)

Содержание P8000





























































































































































































































































































































































































































































Результаты поиска

Содержание P8000

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom P8000, Руководство по обслуживанию

Результаты поиска

Содержание P8000

Отзывы:

Бренды по названию

Популярные бренды