Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 563 / 746

Chapter 23 CF Card (V7 Only)
23-18
Operation on the V7 Series
When inserting a CF card and put the V7 series in the RUN mode, sampling
data is ready to be stored automatically.
For more information, refer to “Cache.”
♦
Note
•
Unless you reset sampling, sampling data stored on the CF card is saved.
(Except when you format a CF card.)
•
When you remove the CF card from the V7 series, sampling is temporarily
stopped and data is not imported. If sampling data is displayed on the
screen, the data disappears. When you reset a CF card, the history of data
imported in the past is displayed and sampling begins again.
•
When the format of the CF card that you inserted is different, if you check
[ Format Buffering Area Automatically] ([System Setting]
→
[CF Card
Setting]), the sampling file (“Smpxxxx.bin” in the \Sample) is automatically
formatted when inserting the CF card. If the sampling file “Smpxxxx.bin”
already exists, it is overwritten. If you select [CF Card Setting] from the
[System Setting] menu and uncheck [ Format the Buffering Area
Automatically], you need to press the [Function: CF Card Format (Buffer)]
switch and format the sampling file.
* However, when you set not only sampling files but also data files for the
memory manager function to a CF card ( refer to page 23-27), if the data
file format is different, sampling will not begin.
In this case, you need to press the [Function: Card Format] switch to format
both the data files and the sampling files.
When data is written to a CF card is determined by the cache setting of the
screen data file.
For more information on the difference between the [Function: CF Card Format (Buffer)]
switch and the [Function: Card Format] switch, refer to “Chapter 22 Data Logging” (page
22-10).