Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 561 / 746

Chapter 23 CF Card (V7 Only)
23-16
Saving Sampling Data (Data Logging)
You can save the history data such as errors and numeric values. If you convert
the stored sampling data to a CSV file using the macro command, you can edit
the data easily using application software such as Excel.
Screen Data File Setting
♦
Setting Items
Setting items are as follows:
System Setting Buffering Area Setting
•
Automatically set [Type]
of the same number.
No
No. 0 (to 11)
Use Sample Buffer
Yes Store Target
Output File No.
CF Card
n (0 to 15)
System Setting Memory Card Setting
•
No. 0 (to 15)
I/F Memory
Type Buffering File
System Setting CF Card Setting
•
Use Cache
Yes
*
Format Buffering Area Automatically Yes
No
* Depending on the save timing, you need to set the [SMPL_SAVE]
macro command.
Part Switch
•
Function: CF Card Format (Buffer)
This setting is necessary when the
sampling format is different.
*1
*1 When using this switch, only Smpxxxx.bin files in the \Sample folder on the CF card
are formatted. Note that the whole CF card is not formatted. However, when the data
file format by the memory manager function is different even if the sampling format is
the same, you need to perform [Function: Card Format] in the memory card mode.
Otherwise, sampling is not performed. In the card format, both the data file and the
sampling file are formatted.
Macro SMPL_CSV
•
Attribute Table
When importing the imported sampling data into your personal computer:
(Auto Creation)
For more information on the
difference between the [Function:
CF Card Format (Buffer)] switch
and the [Function: Card Format]
switch, refer to“Chapter 22 Data
Logging” (page 22-10).
No
What is an Attribute Table?
To convert a BIN format file to the CSV file format, information about the display type
and word/double word is required. Therefore, you need to set this information in
[Attribute Table] of the V-SFT editor. However, if you store sampling data on a CF card,
the required attribute table is automatically created when setting the [SMPL_CSV]
macro command. For more information on the attribute table, refer to page 23-40.