Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 76 / 746

Chapter 2 Overlap
2-11
2
M
u
lt
i-
ov
er
la
p
[ Continue Reading PLC Memory When Set to OFF]
This setting item becomes active when you select a multi-overlap.
* When a call-overlap is selected, reading of the PLC memory continues.
•
Checked (Continue)
After the overlap screen is displayed on the screen, even in the event that
the overlap screen is erased, reading of the PLC memory into the items on
the overlap continues. Because information is already being read, when that
same overlap screen is displayed again, that screen’s display is processed
rapidly. However, the screen display when the overlap is not being displayed
is slowed down.
•
Unchecked (Discontinue)
When an overlap screen that has been read once is erased, its information is
also completely erased. Thus, when displaying the same overlap screen
again, the overlap display is slowed down somewhat. However, the screen
is displayed smoothly.
Macro Setting in Multi-overlap Edit
Overlaps registered on the multi-overlap edit window can be used with the
OPEN or CLOSE macro command. These macro commands can be executed
when the registered overlap is displayed (OPEN macro) or erased (CLOSE
macro) from the screen.
♦
Setting Procedure
On the multi-overlap edit window:
[Edit]
→
[OPEN Macro Edit]/[CLOSE Macro Edit]
* With overlaps defined as [Type: Call], the OPEN or CLOSE macro command is not
valid.
* If you delete the multi-overlap that was set with OPEN or CLOSE macro command,
be sure to delete the command as well. If it is not deleted, an error will occur.