Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 197 / 746

Chapter 7 Entry Mode
7-6
How to Change Over Entry Targets (= [Type: Block])
When there are too many display parts to be displayed on the screen at one
time, data blocks can be used. Place the data block area on the screen.
Register the entry targets in the “data block.” Many entry targets can be
displayed by switching the block No.
♦
Setting Items
•
[Part]
→
[Entry]
•
[Part]
→
[Data Block Area] See page 7-31.
* The same as the data block area in the [Entry] item bar above.
•
[Item]
→
[Data Block]
→
[Data Block Edit]
(Data Block Edit: refer to Chapter 4 in the Reference Manual
(Operation).)
Entry Screen
Max. value
Min. value
Entered value
0
9999
0
7 8 9 UP
4 5 6 DW
1 2 3 CLR
0 . +/- ENT
Number 1
Number 2
Number 3
Number 4
Text 1
0.0
0.00
AAAA
0
0
Data Block No.
UP DW
Data Block No. 2
V4T
V4C
V4B
V4W
V4S
9955
8844
7733
6622
5511
Data Block No. 1
Data 1
Data 2
Data 3
Data 4
1111
2222
3333
4444
Data Block No. 0
Number 1
Number 2
Number 3
Number 4
Text 1
0.0
0.00
AAAA
0
0
Data block area
Data block change switches
Be sure to set.
Set if necessary.
Max. Display See page 7-30.
Entry Dialog See page 7-8.
Min. Display See page 7-30.
New:
Existing:
Entry Display See page 7-29.
Entry Target (Num. Display) See page 7-26.
Keypad See page 7-20.
Data block area See page 7-31.