Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 726 / 746

Appendix 3 Error
A3-5
A3
E
rro
rs
D
isp
la
y
e
d
o
n
th
e
V
7
Se
ri
e
s
Check
♦
Error Details and Solutions
Use the item number and sub item number to confirm the location where the
error took place. Confirm error details with the error number and make
corrections.
POWER
F1
F2
F3
F4
F5
F6
F7
SYSTEM
Check
Screen No. Error
Communication Error
Check I/F driver
Check
Error Message Contents Solution
Screen No. Error There is no setting for the received
screen. The screen specified by the PLC has not
been registered.
An invalid screen number is set in the “n + 2”
memory of the read area.
Data has some error.
Error: XX (XX: XXX) There is an error in the created screen
data. For the contents and solution to each error
number, refer to “Error Details and Solutions.”
Communication error
Check I/F driver Although a request to send is given to
the computer, no answer is returned
within the specified time. The I/F driver for simulator (UNIPLC) is
transferred.
If you don’t use the simulator, uncheck [Use
Simulator] before transferring data.
Error : XX (XX : XXX)
(Warning)
Sub item number (Refer to page A3-6)
Item number (Refer to page A3-6)
Error number (Refer to page A3-7)