Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 98 / 746

Chapter 3 Switch
3-3
3
Notes
Notes
Minimum Switch Unit
The minimum switch unit is 18-dot
×
14-dot. The maximum number of switches
that can be placed varies depending on the V series model. Refer to the chart
below.
Placement
•
If it is unavoidably necessary to do so:
Note that the overlapping area cannot be detected by the system. Only the
switch that is placed earlier becomes valid. The order of placement can be
checked by selecting [Display]
→
[Item List]. ( For information on the
item list, refer to Chapter 1 in the Reference Manual (Operation).)
Example: When switches No. 0 and 1 have been created in the ascending
order of the number:
•
When placing switches on an overlap:
If the following two conditions exist at the same time, “Error: Action area
setting” will be given. Remove either condition.
- X size of the switch is
minimal.
- Shift the overlap
position by 1-byte from
the switch grids.
Do not use switches where they could cause injury to people or damage
machinery. Moreover, do not use switches as emergency switches.
V7 series/V612/610/608 V606/606i
Maximum number per screen 768 192
Minimum unit
14 dots
18 dots
When placing two or more switches, do not allow them to overlap each other.
Switch No. 0
Switch No. 1
Switch No. 1
Switch No. 0
When pressing here:
Minimal X size
Shift the overlap
position by 1-byte.