Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 221 / 746

Chapter 7 Entry Mode
7-30
Entry Data Range
In the case that [Alarm] is set on the numerical data display part for entry target,
minimum and maximum data are displayed.
Notes on setting of minimum and maximum displays are provided below.
For the other setting items, refer to “Chapter 5 Data Display.”
♦
[Main] Tab Window
[Division No.]
Be sure to specify the same division number as in the [Entry] dialog.
(Division number:
Refer to Chapter 2 in the Reference Manual
(Operation).)
♦
[Type] Tab Window
[Display Function]
Be sure to select [Max. Display] or [Min. Display].
[Digits]
The number of digits set for entry data range (minimum or maximum display)
must be greater than that of the entry target. If not, data for the entry target
exceeding the maximum number of digits for entry data range cannot be
entered.
[Decimal Point]
When the entry targets have the same settings of [Digits] and [Decimal
Point], enter the same value of [Decimal Point].
In the case that the settings of [Digits] and [Decimal Point] differ for each
entry target:
When there are entry targets for which [Decimal Point] is set, specify “1” for
the entry display. When there is no entry target for which [Decimal Point] is
set, specify “0.”
[Display Type]
When the entry targets have the same setting of [Display Type], specify the
same. When the setting of [Display Type] differs for each entry target,
choose the setting for the greatest number of digits.
Minimum and maximum displays can be set only for numerical data entry.
They are not available for character display.