Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 167 / 746

Chapter 6 Message Display (Relay/Message)
6-4
•
Also, it is possible to link a screen display to the message and to call it up
when the bit is set. (Screen call)
Relay Mode Setting Procedure
Registering Messages
Required messages should be registered in the “message edit” area in advance.
“Message edit” is a different edit area from the screen edit window.
The messages registered in the message edit area are used in either message
mode or data display (= message display), not only in relay mode.
For information on how to register messages as well as the composition of the
message edit area, refer to “Chapter 4 Registration Items” in the Reference
Manual (Operation).
B-Line Data
A-line data
B-line data
D-line data
G-line data
No. 1 servo 0000
No. 2 servo 0000
No. 3 servo 0000
No. 1 motor 0000
No. 2 motor 0000
No. 3 motor 0000
In response to bits (ON) in PLC,
the corresponding messages are
displayed on the screen.
The screen related message
(ex. B-line data) is displayed.
From the displayed messages,
press on the message for which you
want to bring up related screen.
* For information on how to register messages, refer to “Chapter 4 Registration Items” in the
Reference Manual (Operation).
Item Message
Group No. 0 (to 23)
Message No. 0 (to 255)
Screen Edit [Relay Mode] icon Relay mode tool bar
Page
6-9
Page
6-11
Page
6-11
Page
6-16
•
•