Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 419 / 746

Chapter 13 Macro
13-36
Setting Items
•
[Part]
→
[Interval Timer]
→
Interval timer setting
•
[Item]
→
[Macro Block Edit] (Refer to Chapter 4 in the Reference Manual
(Operation).)
Interval Timer Setting
* [Time-up Time] might not be correct according to the contents of the screen.
[Division No.]
Specify the division number.
Set a division number where no mode has been registered. (
For
information on the division number, refer to Chapter 2 in the Reference
Manual (Operation).)
[Macro Block No.]
Specify the macro block number to be executed at intervals of the time set
for [Time-up Time]. (
For information on macro blocks, refer to Chapter
4 in the Reference Manual (Operation).)
[Time-up Time] (
×
100 msec)
Set the time interval to execute the specified macro block. The macro block
is executed at intervals of the time set for [Time-up Time] after the screen is
opened. When “0” is specified for [Time-up Time], the macro block is
executed at every cycle.
[ Start Mem. Designation]
Check this box when specifying the start memory.
While the start memory bit is “1”: The macro block is executed each time
[Time-up Time] has elapsed.
While the start memory bit is “0”: The macro block is not executed without
counting [Time-up Time].
When [ Start Mem. Designation] is checked, the timer remains off even after
the screen has been opened and the time set for [Time-up Time] has elapsed.
(Refer to the following explanation.)