Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 360 / 746

Chapter 10 Sampling
10-65
10
Al
a
rm
D
isp
la
y
Display Area
This is the area where sampling message is displayed.
♦
Notes on Setting
[Division No.]
Set the same division number as that in the [Alarm Display] dialog.
[Display in Area]
Choose colors for the sampling display area. The [Background] option
becomes active when any tile pattern other than pattern 0 (extreme left) is
chosen for [Tile].
[ Display Area Transparent]
This is invalid for alarm display. Uncheck this option.
Switches for Alarm Display
♦
Notes on Setting
[Division No.]
Set the same division number as that in the [Alarm Display] dialog.
[Function]
Set the switch function. The following switch functions are available with
alarm display.
Function Contents
Roll Up Scrolls up by one data element toward the most recent entry. If all data cannot be held
in the graph, one data element at a time scrolls into view.
Roll Down Scrolls down by one data element toward the oldest entry. If all data cannot be held in
the graph, one data element at a time scrolls into view.
Plus Block Scrolls up by one page toward the most recent entry.
Minus Block Scrolls down by one page toward the oldest entry.
Graph Return Returns to the most recent graph display when it is pressed while flashing. Flashing is
canceled as well as the selection.
Display
Change This switch is valid when [Date Only] or [Time Only] is selected for [Calendar Condition]
on the alarm display. Pressing this switch changes between the date and time display.
Reset When the switch is pressed once, it is turned on. Pressing it again within 2 seconds
clears the buffering area. Sampling restarts immediately after clearing. If not pressed
again within 2 seconds, the switch is turned off, and resetting is nullified.
Display Order
Change Changes over data display order: in order of occurrence (from old to new) or in the
reverse order (from new to old).
DEL Deletes the selected message from the display area. Only valid when [Occurrence
Time] or [Cancellation Time] is selected for [Display Mode].