Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 200 / 746

Chapter 7 Entry Mode
7-9
7
En
try
D
ial
og
Se
ttin
g
[ Use Writing Enabled Bit]
Unchecked
The status of [Command Memory] (writing enabled, bit 15) is ignored.
Keypad entry is always available.
Checked
Bit 15 of [Command Memory] (writing enabled) determines whether or
not the keypad is enabled.
•
[Input item select: Internal]
- Entry area selection (bit 13)
Select the movement area when moving the cursor by pressing the
Up/Down switch.
0: The cursor is moved to the areas in the following order:
1. on the base screen
2. on overlap 0
3. on overlap 1
4. on overlap 2
1: The cursor can be moved in the specified area only.
The area is specified by bits 0 and 1.
- Cursor Movement (bit 14)
This bit determines whether or not to move the cursor automatically to
the next display part after pressing the ENT key.
0: The cursor remains in the same position when the ENT key is
pressed.
1: The cursor moves to the next display part when the ENT key is
pressed.
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
0 0 0 0 0 0 0 0 0 0 0
Command
memory n
MSB
Bit No. Type
1 0 Data Display Block
0 0 Base Data block area No. 0
0 1 Overlap 0 Data block area No. 1
1 0 Overlap 1 Data block area No. 2
1 1 Overlap 2 Data block area No. 3
Entry area selection
0: Disabled
1: Enabled
Cursor movement
0: Manual
1: Automatic
Writing enabled/disabled
0: Writing disabled
1: Writing enabled
When bit 13 is [1], select the entry area (0 to 3).
LSB