Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 537 / 746

Chapter 22 Data Logging
22-8
When Storing to a CF Card:
This section describes setting items for data logging. It assumes that you have
already set the sampling mode. For more information on the sampling mode,
refer to “Chapter 10 Sampling.”
Setting Procedure
Setting items are as follows:
System Setting Buffering Area Setting
•
Automatically
set [Type] of the
same number.
No
No. 0 (to 11)
Use Sample Buffer
Yes
Store Target
Output File No.
CF Card
n (0 to 15)
System Setting Memory Card Setting
•
No. 0 (to 15)
I/F Memory
Type Buffering File
System Setting CF Card Setting
•
Use Cache
No
Yes
*
Format Buffering Area Automatically
Yes
No
* Depending on the save timing, you need to set the [SMPL_SAVE]
macro command.
Part Switch
•
Function: CF Card Format (Buffer)
This setting is necessary when
the sampling format is different.
*1
*1 When using this switch, only Smpxxxx.bin files in the \Sample folder on the CF
card are formatted. Note that the whole CF card is not formatted. However, when
the data file format by the memory manager function is different even if the
sampling format is the same, you need to perform [Function: Card Format] in the
memory card mode. Otherwise, sampling is not performed. In the card format,
both the data file and the sampling file are formatted.
Macro SMPL_CSV
•
Attribute Table
When importing the imported sampling data into your personal computer:
(Auto Creation)