Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 189 / 746

Chapter 6 Message Display (Relay/Message)
6-26
[Initial Block]/[Max. Block]/[Min. Block]
These options must be specified when [Block] and [Internal] are chosen for
[Action Select] and [Command], respectively.
•
Initial Block
This is the block to be displayed at first when the page or direct blocks are
called up on the screen.
•
Max. Block
This is the greatest number of page or direct blocks to be used in the
message mode.
•
Min. Block
This is the smallest number of page or direct blocks to be used in the
message mode.
[Process Cycle]
Set a cycle for the V series to read the PLC data while it is communicating
with the PLC. For more information, refer to “Appendix 2 Process Cycle.”
♦
[Char. Prop.] Tab Window
Display Area Parts
When settings are made in the [Main] tab window of the [Message] dialog for
[Action Area: Area], you must also set display area parts. The message is
displayed in the display area.
Display area parts cannot work just by being placed. By establishing a link with
the [Message] dialog, they can work as a part for message mode.
* Association is performed by [Division]. If you set display area parts with the
same division number as the [Message] dialog, it is recognized as a display area
part for use in message mode.
For more information, refer to page 6-7.
For more information on the display area part, refer to page 6-9.