Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 331 / 746

Chapter 10 Sampling
10-36
[Digits]
Depending on the [Display Type] selection, the available data range
varies as shown below. If the decimal point is included in numbers, it
does not need to be counted.
Example: 99.9
→
3 digits
[Decimal Point]
Specify the decimal place. When no decimal point is required, set “0.”
[Display Type]
Select the code for displaying data that is read in the code specified by
[Input Type]. The available codes are DEC (w/o sign), DEC (w/
−
sign),
DEC (w/ +/
−
sign), HEX, OCT, and BIN.
[Input Type]
Choose the code to be used when reading from the PLC memory.
[BCD], [DEC]
[Data Length]
Choose either [1-Word] or [2-Word] for the data length of the specified
memory.
[Display Type] and available ranges
* Depending on the [Display Type] selection, the available range of data
varies. In particular, for data close to the border between [1-Word] and
[2-Word], double-check the display range.
[Zero Suppress]
When using the zero suppress function, check the box. If you check this
box, the following options become active.
[Flush R]/[Flush L]
Choose either flush-left or flush-right for aligning numbers.
[Sample Buffer Word No.]
In regard to the words entered for [No. of Words] in the [Buffering Area
Setting] dialog, specify the word address to be referred to for displaying
sampled data. For more information, refer to the trend sampling example
on page 10-24.
Display Type Digits Decimal Point
DEC 1 to 10 0 to 9
HEX 1 to 8
−
OCT 1 to 11
−
BIN 1 to 32
−
Display Type 1-word Range 2-word Range
DEC (w/o sign) 0 to 65535 0 to 4294967295
DEC (w/
−
sign)
−
32768 to 32767
−
2147483648 to 2147483647
DEC (w/
±
sign)
−
32768 to +32767
−
214748648 to +2147483647
HEX 0 to FFFF 0 to FFFFFFFF
OCT 0 to 177777 0 to 37777777777
BIN 0 to 1111111111111111 0 to 11111111111111111111111111111111