Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 60 / 746

Chapter 1 System Setting
1-23
1
Se
tti
ng It
ems
fo
r o
the
r F
u
nc
tio
n
s
Setting Items for other Functions
Function Switch Setting
There are function switches [F1] to [F7] ([F1] to [F7] for V606/V606i) provided on
the surface sheet of the V series. These function switches work for the
dedicated functions while the menu is displayed by pressing the [SYSTEM]
switch. When the menu is not displayed and MONITOUCH is engaged in
communications with the PLC, these settings are valid for all the screens.
♦
Setting Procedure
1. Select [Function Switch Setting] from the [System Setting] menu.
The [Function Switch Setting] dialog is displayed.
2. When [ Use Function Switch] is checked, the following settings are
available on the [F1] to [F7] tab windows.
♦
Setting Items
[Function]
The following function can be set for function switches.
[None]
[Screen]
No.
[Overlap] No. Action ([ON]/[OFF]/[ALT])
[Hard Copy]
[Word Operation]
Operation setting
[Return]
[Occupy] (Valid when [Multi-Link] is selected for [Connection])
[Action] ([Momentary]/[Set]/[Reset]/[Alternate]/[Momentary W])
This option is active when [Output Memory] is checked. Select the write
operation to the output memory.
[ Output Memory]
Check this option when you would like to write output information to the
specified memory address when the function switch is pressed. Specify the
memory address where output information should be written. Select the
desired output operation for [Action] described above.
If you would like to change the function switch setting for a screen, select [Local
Function Switch Setting] from the [Edit] menu and make the desired setting for the
screen. For the screen with the local function switch settings, the local function switch
settings have priority over those set by selecting [Function Switch Setting] from the
[System Setting].
Note that the available functions for function switches are limited.