Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 622 / 746

Chapter 25 Memory Card Mode
25-13
25
M
e
mo
ry
Ca
rd
Se
ttin
g
F. n + 5 (CFM_TRFIN)
Formatting or data transferring condition between the MONITOUCH V series
(= SRAM area or CF card) and the PLC is stored. The allocation of memory
is shown below.
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
0 0 0 0 0 0 0 0 0
MSB LSB
Error (1) Formatting (2)
Transferring from V series
→
PLC
Transferring from PLC
→
V series
Formatting (4)
Transferring from V series
→
PLC completed
Transferring from PLC
→
V series completed
(5)
(3)
Bit No. Contents Description
0 Error
When an error has occurred during formatting or
transferring, this bit is set to “1.” Bits for (2) “formatting” and
(3) “transferring” remain “1.” Bits for (4) “format completed”
or (5) “transferring completed” remain “0.”
1 to 8 Not used These bits must be reset to “0.”
9 Formatting While formatting, this bit is set to “1.”
10 Transferring from V series
→
PLC While transferring, this bit is set to “1.”
11 Transferring from PLC
→
V series While transferring, this bit is set to “1.”
12 Not used These bits must be reset to “0.”
13 Formatting When formatting has been completed, this bit is set to “1.”
14
Transferring from V series
→
PLC
completed
When transferring has been completed, this bit is set to “1.”
The file or record number transferred can be checked with
“CFM_FILENo” (n + 3) and “CFM_RECDNo” (n + 4). After
checking that transferring has been completed, reset bit 14.
15
Transferring from PLC
→
V series
completed
When transferring has been completed, this bit is set to “1.”
The file or record number transferred can be checked with
“CFM_FILENo” (n + 3) and “CFM_RECDNo” (n + 4). After
checking that transferring has been completed, reset bit 14.