Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 410 / 746

Chapter 13 Macro
13-27
13
Mac
ro Co
mma
nds
- Window number (0 to7) is:
0: Base
1: Overlap No. 0
2: Overlap No. 1
3: Overlap No. 2
4: Data block No. 0
5: Data block No. 1
6: Data block No. 2
7: Data block No. 3
- Display type
0: No sign 1: With signs 2: With sign (+) 3: HEX 4: OCT 5: BIN
Other display types are not changed.
- Foreground color: bit 0 to 7 Background color: bit 8 to 15
- Digits: Bit 0 to 7 If the digits are 0 or 33 or greater, they
cannot be changed.
- Decimal point: Bit 8 to 15 If it is 11 or greater, the decimal point
cannot be changed.
When using this command, use the DSP_DATA command mentioned above.
Example: Change data display properties of DIV No. 1 of the base screen.
Type DEC
→
HEX
Digits 4 digits
→
3 digits
Character color: White
→
Green Use the following macro commands:
$u0031=1 (w)
→
DIV No. 1
$u0032=0 (w)
→
Non-display
SYS (DSP_DATA) $u30
→
Numerical data display non-display
$u0021=1 (w)
→
DIV No. 1
$u0022=3 (w)
→
Type HEX
$u0023=H0004
→
Foreground color: green, background color:
black
SYS (CHG_DATA) $u20
→
Display property change
$u32=1
→
Display
SYS (DSP_DATA) $u30
→
Display of numerical data display
•
STA_LIST
This command prints out data sheets. For more information, refer to
“Chapter 14 Data Sheets.”
•
RGB_CHG / SET_RGB
These commands are available only when using the V series of analog RGB
input type. For more information about it, refer to Specification of Analog
RGB Input.
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Blink
0 to 127 colors
Background color Foreground color
Blink
0 to 127 colors
The number of colors selectable with the CHG_DATA command is limited to “128 colors
+ blink” if the screen data is created with 32K colors.