Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 313 / 746

Chapter 10 Sampling
10-18
Buffering Area Setting Example
Set up buffers as given below:
Memory addresses are allocated following [Read Area] n + 3 as shown below.
Buffer No. 0 [Info. Output Memory: D500] Buffer No. 1 [ Use Sample Buffer]
[ Use Sample Buffer] [ Memory Designation]
[ Memory Designation] [Sampling Method: Relay Sample]
[Sampling Method: Bit Sample] [No. of Words: 3]
[No. of Words: 2] [Sampling Time: 0]sec
[Sampling Time: 0] sec
[No. of Samples: 1000]
[Storage Target: Internal Buffer]
[Full Processing: Continuous]
Buffer No. 2 [ Use Sample Buffer]
Buffer No. 3 [ Use Sample Buffer] Buffer No. 4 [ Use Sample Buffer]
[ Memory Designation] [ Memory Designation]
[Sampling Method: Constant Sample] [Sampling Method: Bit Synchronize]
[No. of Words: 8] [No. of Words: 4]
[Sampling Time: 1] sec [No. of Samples: 500]
[No. of Samples: 1500] [Storage Target: Internal Buffer]
[Storage Target: Internal Buffer] [Full Processing: Continuous]
[Full Processing: Continuous] [ Use Operation]
[ Use Operation]
n + 3 Sample control memory
n + 4 Sample control memory
n + 5 Buffer No. 0 Data 0 (Bits 0 to 15)
n + 6 Data 1 (Bits 16 to 31)
n + 7 Buffer No. 1 Data 0 (Bits 0 to 15)
n + 8 Data 1 (Bits 16 to 31)
n + 9 Data 2 (Bits 32 to 47)
n + 10 Buffer No. 3 Data 0
n + 11 Data 1
n + 12 Data 2
n + 13 Data 3
n + 14 Data 4
n + 15 Data 5
n + 16 Data 6
n + 17 Data 7
n + 18 Buffer No. 4 Data 0
n + 19 Data 1
n + 20 Data 2
n + 21 Data 3
Buffer sizes used are shown below:
Buffer No. 0 = 3
×
1000 = 3000
Buffer No. 1 = 48
×
3 = 144
Buffer No. 3 = (8 + 2)
×
1500 = 15000
Buffer No. 4 = (4 + 2)
×
500 = 3000 Total 21,144 words