Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 402 / 746

Chapter 13 Macro
13-19
13
Mac
ro Co
mma
nds
♦
System Call
Expression F0 F1
Action According to information taken from the MONITOUCH, an action
specified in F0 is requested to the MONITOUCH through the
internal memory specified in F1.
*1 • These macros cannot be executed as initial macro or screen OPEN/CLOSE macro.
• Moreover, these system calls are not immediately executed, but rather, are
executed when the entire macro has been completed.
*2 • This is not available with screen OPEN macro.
•
SET_SCRN
Set the screen number that will be displayed.
Available Devices
(SET_SCRN)F1 Screen number designation
Clicking the F0 box brings up the following system call list.
System Call Contents
SET_SCRN Screen number setting
*1 *2
SET_MOVLP Multi-overlap setting
*1
OVLP_SHOW Overlap On/Off
*1
OVLP_POS Overlap position setting
*1 *2
GET_MSG Get the message from the message group
GET XY Get the X and Y coordinates on the circumference
SET_BZ Buzzer ON/OFF
GET TIME Get the system time
STA_TIME Start the timer
CHK_TIME Check the time of the timer
GET_CLND Get the calendar
SET_CLND Calendar setting
SET_BUFNO Get buffer information
GET_SMPL Get sampled data
GET_SCUR Get the cursor point of sampling
GET_BUF Get alarm function information
DSP_DATA Display/not display the data display (=numerical data)
CHG_DATA Change the property of the data display (=numerical data)
STA_LIST Print out the data sheet
RGB_CHG For analog RGB input type
SET_RGB For analog RGB input type
SET_BKLT Backlight control
RESTART Re-connect
CONTRAST Contrast adjustment (STN display)
CHG_LANG Change language
GET_STATUS_FL Get FL-Net information
SET_DSW Deadman switch use/non-use (V608CH)
OUT_ENQ • Interrupt via serial port
• Network selection of A link + Net10 communication
Internal
Memory
PLC
Memory
Constant
Memory
Card
Indirect W Word
F0 Command
name
F1
F1 + 0 Screen number to be displayed