Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 587 / 746

Chapter 23 CF Card (V7 Only)
23-42
♦
To Check/Change the Setting:
To check or change the attribute setting that was automatically set, follow the
steps below.
1. Select the line to check/change.
2. Select [Attribute Setting] from the [Edit] menu. Or right-click and select
[Attribute Setting]. The [Attribute Setting] dialog is displayed. The displayed
dialog varies depending on the [Sampling Method] in the [Buffering Area
Setting] dialog.
•
[Constant Sample], [Bit Synchronize], and [Temp. Control Net/PLC2]
[Format] tab window
The number of setting contents displayed is specified with [No. of
Words]. Select the type, the decimal, and the number of words.
[All Same]
Select all at once according to the current setting contents.
[Delete]
Set the current selecting item to the default ([DEC], [Decimal: 0],
[1 Word]).
[Set]
Changes in the selected item are updated and displayed in the
dialog.