Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 171 / 746

Chapter 6 Message Display (Relay/Message)
6-8
♦
[Detail] Tab Window
[ Relay Info. Out]
Choose whether data of the message displayed or selected in relay mode
should be output to the PLC. If you want to output data, check the box, and
specify the desired top memory address.
No:
Relay data output memory
Yes: Relay data output memory Top memory n
Memory addresses are allocated as shown below.
•
n (RLYCT: total number of ON relays)
The number of bits currently set to ON is written.
•
n + 1 (SELNO: selected relay No.)
When [Sub-display] is chosen for [Sub-action] in the [Main] tab window, the
priority number of the relay message among those being displayed (starting
from #1) is output.
When [None] is chosen for [Sub-action], the ranking of priority (starting from
“1”) of the top message among those displayed is output.
Relay Info Output Memory Contents
n RLYCT
n + 1 SELNO
n + 2 RLYNO
Priority No. 1 =
Priority No. 2 =
Priority No. 3 =
Priority No. 4 =
Priority No. 5 =
A A A A A A
B B B B B B
G G G G G G
O O O O O O
X X X X X X
n+1 = 4
From the priority:
Priority
When [Memory] is specified in the [Main] tab window, memory addresses are allocated
to each message consecutively. The memory bit number with the greatest priority is the
smallest number, and as the bit number of memory allocated to the message increases,
the priority decreases.