Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 732 / 746

Appendix 3 Error
A3-11
A3
E
rro
rs
D
isp
la
y
e
d
o
n
th
e
V
7
Se
ri
e
s
143 [Temp. control network/PLC2Way]
The temperature control
network/PLC2Way table is not set. Check the temperature control
network/PLC2Way table and set
correctly.
144 [Temp. control network/PLC2Way]
No modular setting is made. Check the modular setting for the
temperature control network/PLC2Way
function.
145 [Temp. control network/PLC2Way]
The temperature control
network/PLC2Way table is duplicated. Check that the table number is not
duplicated in the [Buffering Area
Setting] dialog, and set correctly.
146* [Temp. control network/PLC2Way]
Temperature control network/PLC2Way
table setting memory error Contact your local distributor.
147 [Temp. control network/PLC2Way]
The model of the temperature
controller/PLC2Way does not match
the driver. Bring up the Main Menu screen
→
[Extension], and check the version. If
necessary, transfer screen data or the
temperature control/PLC2Way driver.
155 FROM data unregistered
The default.dtm file is not transferred
when [
Use Internal Flash ROM as
Back-up Area] is checked in the [Unit
Setting] dialog.
Or no port number table is found
though [
Use Station Number Table]
is checked for temperature control
network.
When this item is checked, the screen
data capacity of the Main Menu screen
becomes 128 kbytes smaller than the
case when it is not checked. Check the
setting.
If the capacity is not reduced, contact
your local distributor.
156 Both [ Use Internal Flash ROM as
Back-up Area] in the [Unit Setting]
dialog and [
Use Station Number
Table] for the temperature control
network are checked.
It is not possible to use both functions
at the same time. Uncheck either item,
and transfer screen data again.
157 [Temp. control network/PLC2Way]
Port numbers in the port number table
are duplicated. Be sure to avoid port number
duplication when the port number table
is changed by the FROM_WR macro
command.
160 The SRAM area size exceeds the
available range.
Cassette:
256 k words
Built-in: 32 k words
Check the setting in the [SRAM/Clock
Setting] dialog.
161 The SRAM area is not formatted. Format the SRAM area on the
“SRAM/Clock” screen that can be
displayed from the Main Menu screen.
Check that the battery voltage is not
lowered.
162 Data in the SRAM area does not match
the system program version. Check the system program version,
and contact your local distributor.
163 The setting in the [SRAM/Clock Setting]
dialog does not match the SRAM area
format. Format the SRAM area on the
“SRAM/Clock” screen that can be
displayed from the Main Menu screen.
170 The ladder communication program
does not exist in the V series though
[Ladder Tool] is selected for [Modular
Jack] for the screen data. When ladder transfer is not performed,
uncheck [Ladder Tool] for [Modular
Jack 1 (or 2)].
To perform ladder transfer, transfer the
“MelQHCpQ.lcm” program to the V
series.
V7 V6 Error No. Contents Remedies