Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 621 / 746

Chapter 25 Memory Card Mode
25-12
A. n (CFM_STAT)
B. n + 1 (CFM_ERRNo)
When bit 0 of “CFM_STAT” (n) is set (an error has occurred), an error
number (for error contents) is stored in “CFM_ERRNo” (n + 1). Respective
error numbers indicate the following contents:
C. n + 2 (CFM_CARDNo)
The current memory card number is stored.
D. n + 3 (CFM_FILENo)
The selected or transferred file number is stored.
E. n + 4 (CFM_RECDNo)
The selected or transferred record number is stored.
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
0 0 0 0 0 0 0 0 0 0 0 0 0
MSB LSB
Sample data operation
Battery voltage Error
Bit No. Contents Description
0 Error
When an error related to the memory card has occurred, this bit is set to
“1” (ON). The error contents are stored in “CFM_ERRNo” (n + 1).
1 to 6 Not used These bits must be reset to “0.”
7 Battery voltage
When the battery voltage of the memory card decreases, this bit is set
to “1” (ON). Replace the battery as soon as possible.
8 to 14 Not used These bits must be reset to “0.”
15
Sample data
operation
This bit is active when [ Use Operation] is checked in the [Buffering
Area Setting] dialog for the data logging function. If operation of data in
the buffering area is being performed at the time of memory card data
reading, this bit is set to “1” (ON).
Error No. Contents
1 There is an error in the memory card I/F board.
2 The memory card recorder is not connected.
3 An error has arisen during communication between the MONITOUCH
V series and the recorder.
4 No memory card is inserted.
5 Memory card format is different from the setting data.
(Or the memory card is not formatted.)
6 Memory card capacity is smaller than the setting data.
7 The memory card is not compatible.
10 Attempted to write to a memory card of FLASH ROM.
11 The memory card is write-protected.
12 There is an error in writing data to the memory card.