Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 731 / 746

Appendix 3 Error
A3-10
95 MR400 format table
String code error There is an illegal code after “\” in the
string.
96 MR400 format table
String size error The total size of the string is too large.
97 Multi-language font setting error Transfer the first language font or
screen data again.
100 Universal serial
GD-80 compatibility is set in entry
mode. Uncheck [GD-80 Compatible] in entry
mode.
101 Universal serial
System memory setting error Check whether or not access to outside
the specified memory is attempted,
such as for macro indirect designation.
102 Connection type setting error Check the setting for [Connection] in
the [Comm. Parameter] dialog.
103 Network I/O size setting error Check the number of words set for [No.
of Works Setting for I/O] in the [Comm.
Parameter] dialog.
104 Network table setting error Check the setting on the network table.
120 [Multi-Link] is not selected at [Modular
Jack 1 (or 2)] in the case of
[Connection: Multi-Link2]. [Select [Multi-Link] at [Modular Jack 1
(or 2)].
121 [Multi-link2] port number error.
The value for [Local Port] or [Total] is
out of the range of 1 to 4. Set the value of [Local Port] or [Total]
within the range of 1 to 4.
130* [Ethernet]
Network byte error Contact your local distributor.
131 [Ethernet]
The local port is not set in the table. Check the port number of the I/F unit,
and check that the local port is set on
the network table edit window.
132* [Ethernet] [DNA]
The network table is not found or is not
the right one. Contact your local distributor.
133 [Ethernet]
IP address No. error Check the IP address on the network
table edit window.
134 [Ethernet]
Port No. error Check the port number on the network
table edit window.
135 [FL-net]
FL-net data error Check the setting for [FL-Net] in the
[Comm. Parameter] dialog.
140 [Temp. control network/PLC2Way]
The version of the temperature
control/PLC2Way driver does not
match the version of the system
program. Check that the system program version
is compatible with the temperature
control network/PLC2Way function,
and if necessary, update the system
program version.
141 [Temp. control network/PLC2Way]
Multi-link 2 connection is set.
(communication parameter setting) It is not possible to use multi-link 2
connection and temperature control
network/PLC2Way function at the same
time.
142 [Temp. control network/PLC2Way]
The temperature control/PLC2Way
driver is not found. Transfer the temperature
control/PLC2Way driver.
V7 V6 Error No. Contents Remedies