Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 349 / 746

Chapter 10 Sampling
10-54
Print
Bit sampling data can be printed. There are two print types: “sample print” that
prints all data in the buffer, and “real time print” that prints the selected data only
during sampling.
♦
Sample Print
All the data in the buffer is printed.
Print Timing
•
When the [Function: Sample Print] switch is pressed
•
When bit 15 (print command memory) is set (0
→
1) ( For information
on the print command memory, refer to page 10-47.)
Every ON/OFF information is saved in the buffering area.
It is also possible to print the currently displayed status.
Setting
Select [System Setting]
→
[Unit Setting]
→
[Environment Setting].
Check [ Print out Bit Sampling as Displayed].
Printout (0
→
1)
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
MSB LSB
Memory n
Be sure to reset the bits not in use to “0” in the print command memory.
For the V6 series, this is available with program ver. 1.450 or later.