Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 460 / 746

Chapter 17 Animation (V7 Only)
17-5
17
Reg
is
tr
a
ti
on o
f A
n
im
ati
o
n
[Animation No.] (0 - 1023)
Animation number which you are editing currently is displayed. You can
change the animation number by clicking the up/down arrow buttons.
You can also enter the number directly without using the buttons.
[ Use]
Animation number is set by checking this box. To clear the setting,
uncheck this box.
[Start Frame No.]/[End Frame No.] (0 - No. 1022)
Set the scope (number) of the frames for this animation.
[Seconds to Replay] (
×
100 msec)
Set the switching cycle (speed), when you switch and display the frames
that you specified with [Start Frame No.] and [End Frame No.].
Ex: [Start Frame No.] [5]
[End Frame No.] [9]
[Seconds to Replay] [30] (
×
100 msec)
Animation is switched as shown below.
[Test] field
After registering the frames, you can check the actual motion of
animation. For more information, refer to page 17-8.
3. When the settings are completed, click the [Close] button. Go back to the
[Animation] window.
Frame
It means each panel to be used for animation.
Register with dot drawing.
For how to register frames, refer to page 17-7.
Frame No. 0 Frame No. 1 Frame No. 2 Frame No. 3
Frame No.5 Frame No.6 Frame No.7 Frame No.8 Frame No.9
30
×
100 msec = switches in 3 seconds
In the case of consecutive play, it repeats after 3 seconds.