Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 217 / 746

Chapter 7 Entry Mode
7-26
Entry Target (Numerical Data/Character/
Table Data Display Part)
Set and place the numerical data, character, and table data display part, which
will display the data entered through the keypad.
In the case of Numerical Data/Character Display Part
The following describes important setting items when the entry target is
numerical data display parts or character display parts. For the other setting
items, refer to “Chapter 5 Data Display.”
♦
[Main] Tab Window
[Division No.]
Specify the desired division number. ( For more information about the
division number, refer to Chapter 2 in the Reference Manual (Operation).)
[Memory]
Specify the desired memory address. When pressing the ENT key, the data
is written directly to this address.
♦
[Type] Tab Window
[Display Function]
Select [Entry Target]. A link with the entry mode is established.
[Order]
This is an ordinal number to select and recognize the entry target. This
option becomes active when [Entry Target] is chosen for [Display Function].
•
Select [Input Item Select: Internal] in the [Entry] dialog.
The cursor is moved by the value of the ordinal number. The ordinal
number of the entry target selected by the cursor is written in [Info.
Output Memory].
•
Select [Input Item Select: External] in the [Entry] dialog.
The cursor is displayed on the entry target of the specified ordinal
number from [Command Memory] and output to [Info. Output Memory].
♦
Placement
Place the set numerical data display part on the screen. You can place it
anywhere on the base screen or overlaps 0 to 2.