CHAP
. 4
GE Healthcare
Senographe 2000 D Acquisition System
REV 1
OM 5179217–1–100
47
D
Automatic view selection:
After the operator selects breast laterality, the system determines and displays the correct view
name according to the Gantry arm angle. View names selected automatically are:
RCC, LCC, RMLO, LMLO, LSIO, RSIO, LML, RML, LLM, RLM, LLMO, RLMO, LFB, RFB.
If magnification is in use, the letter M is automatically added to the view name after the
laterality letter (e.g., LMCC for a mag view on the left breast in the CC position).
D
Special view selection (for standing or sitting patients):
When a special view is used which does not correspond to the automatic view selection, press
the
Special Views Selection
key as often as required until the desired view name is displayed.
Refer to Section 6 for details.
D
Recumbent patients:
The automatic and special view selection procedure applies only to standing or sitting patients.
View names for recumbent patients (patients unable to stand or sit for the mammogram) are
selected by using the
SETUP
key to access the
<RECUMBENT>
menu. See Section 6.
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
