Fuji Xerox ApeosPort-V 4070 Скачать руководство пользователя страница 71

Страница: 71 / 719

Replacing Consumables

inte
na
nc
e

With grasping the orange lever, pull out the
staple cartridge.

Note

•

The staple cartridge is firmly inserted. A slight
force is required to pull the cartridge out of
the finisher.

•

When the C3 Finisher Staple Unit 65 Sheets is
installed, pull down the orange lever, and pull
out the staple cartridge.

Pinch both sides of the empty staple case with
your fingers (1), and pull out the staple case
from the cartridge (2).

Important •

The staple case cannot be removed when the
staples are remained in the staple case.
Forcibly removing the staple case may cause
machine malfunction.

Insert the front side of the new staple case into
the staple cartridge (1), and then push the rear
side into the cartridge (2).

With grasping the orange lever of the staple
cartridge, push the staple cartridge into its
original position until it clicks into place.

Close the finisher front door.

Note

•

If the front door is not closed completely, a message appears and the machine will remain paused.

Содержание ApeosPort-V 4070















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ApeosPort-V 4070

Отзывы:

Похожие инструкции для ApeosPort-V 4070

Бренды по названию

Популярные бренды

Fuji Xerox ApeosPort-V 4070, Руководство администратора

Результаты поиска

Содержание ApeosPort-V 4070

Отзывы:

Похожие инструкции для ApeosPort-V 4070

Бренды по названию

Популярные бренды