Fuji Xerox ApeosPort-V 4070 Скачать руководство пользователя страница 521

Страница: 521 / 719

Error Code

521

Problem

Solvin

027-728

[Cause]

The number of files that are to be sent to external services exceeded the maximum
number.

[Remedy] Reduce the number of files, and send them again.

027-730

[Cause]

The number of the document pages attached to the SMTP mail exceeds the maximum
number of pages allowed for the Split Send feature.

[Remedy] Increase the number of pages allowed for the Split Send feature, or reduce the number

of the document pages.

027-731

[Cause]

An error occurred in the machine.

[Remedy] After the scanning for Network Scanning completes, execute the operation again.

027-732

[Cause]

The Network Scanning server is full, or a server disk error occurred.

[Remedy] Check the amount of available disk space. If the disk space is sufficient and the error still

is not resolved, check the status of the disk of the server.

027-733

[Cause]

The SSL setting on the Network Scanning server is disabled.

[Remedy] Enable the SSL setting of the Network Scanning server.

027-734

[Cause]

The certificate of the server used for Network Scanning is not set correctly.

[Remedy] Check the followings:

The Network Scanning server is accessible from your computer using HTTPS protocol.

The SSL server certificate of the Network Scanning server is registered on the machine.

The SSL server certificate of the Network Scanning server is correct.

When the certificate is not registered on the Network Scanning server, disable the
server certificate validation feature of the machine.

027-735

[Cause]

The data transfer using SSL is specified, but the SSL setting of the machine is disabled.

[Remedy] Enable the SSL setting, or specify HTTP for the transfer protocol.

027-736

[Cause]

The server certificate verification feature of the machine is disabled when the server
certificate verification is required.

[Remedy] Enable the server certificate validation. Or, disable the server certificate validation for

data transfer.

027-737

[Cause]

An error occurred while reading data from the pool server for job templates.

[Remedy] Check on the directory where the job templates are stored, and confirm whether the

settings including the access privilege are correct.

027-739

[Cause]

A specified pool server for job templates cannot be found.

[Remedy] Confirm the path name of the pool server for job templates.

027-740

[Cause]

[Remedy] Confirm whether the login user name and the login password are correct.

027-741

[Cause]

Unable to connect to the pool server for job templates.

[Remedy] Consult your network administrator for the network environment and the server

configuration.

027-742

[Cause]

The capacity of the hard disk is insufficient and job templates cannot be stored.

[Remedy] Delete unnecessary data from the hard disk to free up disk space.

027-743

[Cause]

The settings of the pool server for job templates are not correct.

[Remedy] Confirm whether the settings of the pool server for job templates are correct.

Error Code

Cause and Remedy

Содержание ApeosPort-V 4070















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ApeosPort-V 4070

Отзывы:

Похожие инструкции для ApeosPort-V 4070

Бренды по названию

Популярные бренды

Fuji Xerox ApeosPort-V 4070, Руководство администратора

Результаты поиска

Содержание ApeosPort-V 4070

Отзывы:

Похожие инструкции для ApeosPort-V 4070

Бренды по названию

Популярные бренды