Fuji Xerox ApeosPort-V 4070, Руководство администратора

Страница: 532 / 719

15 Problem Solving
532
Problem
Solvin
g
15
033-712 [Cause] Unable to process because of insufficient memory.
[Remedy] Delete unnecessary data.
033-713 [Cause] An error occurred during fax transmission.
[Remedy] Contact our Customer Support Center.
033-716 [Cause] The folder specified from the sender's machine does not exist.
[Remedy] Register the folder.
Refer to "Create Folder" (P.252).
033-717
[Cause] The folder passcode specified from the sender's machine is incorrect. Or, the machine
passcode for reception is incorrect.
[Remedy] Inform the correct information to the sender's machine.
033-718 [Cause] Fax or polling documents do not exist in the folder specified from the sender's machine.
[Remedy] Store fax or polling documents into the folder as necessary.
033-719 [Cause] The document may be deleted by turning the machine off and then on.
[Remedy] Retry sending.
033-721
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
033-724 [Cause] The reception was interrupted because the image volume exceeded the upper limit.
[Remedy] Ask the sender to break up the image data into several transmissions or lower the
resolution of the image.
033-725
[Cause] The hard disk is full.
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
033-726 [Cause] The received document was printed with 1 sided printing, because 2 sided printing is not
available for mixed sized documents.
[Remedy] No measure is required.
033-728 [Cause] The auto print formatting of the received fax document was interrupted by a manual
print operation.
[Remedy] No measure is required. The machine will automatically start the auto print job after
manual printing completes.
033-731 [Cause] The printing of the received fax document was interrupted.
[Remedy] The auto print processing of the received fax document was interrupted by a manual
print operation. No measure is required.
033-732 [Cause] An error occurred while connecting to the EP system.
[Remedy] This is an error occurring during maintenance work by Fuji Xerox. No measure is
required.
033-733 [Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
033-734 [Cause] Because a report job was instructed while preparing to print a received fax, the printing
of the received fax is temporarily suspended.
[Remedy] No measure is required.
Error Code Cause and Remedy