manualshive.com logo in svg

Fuji Xerox ApeosPort-V 4070, Руководство администратора

Продукт Fuji Xerox ApeosPort-V 4070 предоставляет администраторам и пользователям возможность легкого управления задачами печати и сканирования. Скачайте бесплатно Руководство администратора с нашего веб-сайта, чтобы максимально использовать функционал этого устройства. manualshive.com - ваш источник качественных руководств и инструкций.

Поделиться
Скачать
background image

Error Code

523

Problem

 Solvin

g

15

027-757

[Cause]

Probable causes are as follows:
1)An error occurred while connecting the server.
2)The reliable certificate has not been registered on the machine.
3)The server addresses of the SSL server and the destination server are not same.
4)The machine tries to communicate with the server using the encryption method which 

is not supported on the machine.

5)The SSL client certificate has not been registered on the machine.
6)The server certificate has been expired or will be expired soon.

[Remedy] For 1), Check connection between the machine and the server, or the machine and the 

DNS server using ping or trace route.

For 2), Import the CA certificate and intermediate certificate reliable to the SSL server 
to the machine.

For 3), Check whether or not the machine communicates via the SSL proxy server which 
enables you to confirm the SSL communication. When the machine uses the server, set 
the machine not to use the SSL proxy server.

For 4), Check the encryption method supported on the machine. Set the available 
encryption method to the SSL server setting.

For 5), Import the SSL client certificate and configure the setting to use the certificate.

For 6), Check the date and time registered on the machine is precise. If they are not, 
adjust the gap.

027-760

[Cause]

An invalid parameter is specified by XJT command.

[Remedy] Confirm the specified parameter.

027-761

[Cause]

An on-demand print job was sent to the machine using the Web Applications feature, 
but the time interval from receiving the print job until starting the print processing 
exceeded the time limit specified on the machine.

[Remedy] When multiple documents are to be printed, reduce the number of documents, and then 

execute the operation again. If the error still is not resolved, enter the System 
Administration mode, and then select [System Settings] > [Common Service Settings] > 
[Machine Clock/Timers] > [Print-On-Demand Duration], and specify a larger value or "0".

When on-demand printing is executed using the Web Application feature, the print 
processing time is limited. Consequently if many documents are to be printed or if print 
processing takes time, a timeout may occur before all the data are received. To resolve 
this problem, change the time limit value according to the document volume and type. 
If the error still is not resolved, contact our Customer Support Center.

027-762

[Cause]

An on-demand print job is sent to the machine using the Web Applications feature, 
however, the specified job ticket is invalid because of one of the following causes:

z

Abnormal change to the job ticket because of the machine software failure

z

Abnormal change to the job ticket because of a bug on the sender's remote server

z

Abnormal change to the job ticket because of network trouble

z

Intentional alteration to the job ticket

[Remedy] Execute the print job again. If the error still is not resolved, contact our Customer 

Support Center.

027-763

[Cause]

The machine failed to verify the user information against the remote accounting server.

[Remedy] Take one of the following measures:

z

Check whether the remote accounting server is operating properly.

z

Check whether there is no network failure.

z

Connect the network cable securely.

z

Confirm the settings on the machine.

Error Code

Cause and Remedy

Содержание ApeosPort-V 4070
















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ApeosPort-V 4070

Labau TM200 User Manual preview
TM200
Бренд: Labau Страницы: 19
Nantian Electronics PR9 Quick Reference Manual preview
PR9
Бренд: Nantian Electronics Страницы: 4
Intermec PB3 Series User Manual preview
PB3 Series
Бренд: Intermec Страницы: 38
SPRT SP-POS587 User Manual preview
SP-POS587
Бренд: SPRT Страницы: 13
Tally Dascom DP?580 Quick Start Manual preview
DP?580
Бренд: Tally Dascom Страницы: 2
Intellisystem ThermalTronix TT-1260S-UTCM User Manual preview
ThermalTronix TT-1260S-UTCM
Бренд: Intellisystem Страницы: 18
Pantum L2710 Series User Manual preview
L2710 Series
Бренд: Pantum Страницы: 164
Lexmark Pro900 Series Installation Instructions Manual preview
Pro900 Series
Бренд: Lexmark Страницы: 10
Konica Minolta bizhub C754 Installation Manual preview
bizhub C754
Бренд: Konica Minolta Страницы: 28
Xerox DocuColor 7002 Safety Manual preview
DocuColor 7002
Бренд: Xerox Страницы: 18
Wasp WPL606 Quick Start Manual preview
WPL606
Бренд: Wasp Страницы: 2
Xerox Phaser 6200 Brochure & Specs preview
Phaser 6200
Бренд: Xerox Страницы: 4
AccuBANKER MP20 Quick Start Manual preview
MP20
Бренд: AccuBANKER Страницы: 5
Epson L382 SERIES Users Manualuide preview
L382 SERIES
Бренд: Epson Страницы: 97
Epson L566 Quick Manual preview
L566
Бренд: Epson Страницы: 4
Epson L800 Service Manual preview
L800
Бренд: Epson Страницы: 107
Epson L3060 series User Manual preview
L3060 series
Бренд: Epson Страницы: 127
Epson L455 User Manual preview
L455
Бренд: Epson Страницы: 228

Бренды по названию

Популярные бренды

Загрузить еще бренды