Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 88 / 521

Chapter 6: Device Configuration
Altitude
TM
4000 Series Access Point System Reference Guide
88
16 Use the Mesh screen to define how mesh connections are established and the number of links
available amongst access points within the Mesh network.
17 Define the following Mesh Settings:
18 Refer to the Preferred Peer Devices table and select + Add Row to define MAC addresses representing
peer devices for preferred mesh connection. Use the Priority spinner control to set a priority (1 -6)
for connection preference.
19 Select the OK button located at the bottom right of the screen to save the changes to the Mesh
configuration. Select Reset to revert to the last saved configuration.
20 Select the Advanced Settings tab.
Mesh Options include Client, Portal and Disabled. Select Client to scan for mesh
portals, or nodes that have connection to portals, and then connect through
them. Portal operation begins beaconing immediately and accepts
connections from other mesh supported nodes. Select Portal when setting a
mesh connection between two Standalone APs. The default value is
Disabled.
Mesh Links Use the spinner control to define the number of mesh links (1 -6) an access
point radio will attempt to create. The default settings is 3 links.