manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 181 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 181

 

Adoption Overrides

Altitude

TM

 4000 Series Access Point System Reference Guide

181

NOTE

 

A blue override icon (to the left of a parameter) defines the parameter as having an override applied. To 

remove an override, go to the Basic Configuration screen’s Device Overrides field and select Clear Overrides. 
This will remove all overrides from the device.

6

Provide or override the default 

Domain Name

 used when resolving DNS names. The name cannot 

exceed 64 characters.

7

Set or override the following 

Domain Name System (DNS)

 settings:

8

Provide a list of up to three DNS servers to forward DNS queries if DNS resources are unavailable. 
The DNS name servers are used to resolve IP addresses. Use the Clear link next to each DNS server 
to clear the DNS name server’s IP address from the list.

9

Select 

OK

 to save the changes and overrides made to the DNS configuration. Select 

Reset

 to revert to 

the last saved configuration.

Enable Domain Lookup

Select the radio button to enable DNS on the access point. When enabled, 
human friendly domain names can be converted into numerical IP 
destination addresses. The radio button is selected by default.

Enable DNS Server 
Forwarding

Select to enable the forwarding DNS queries to external DNS servers if a 
DNS query cannot be processed by the access point’s own DNS resources. 
This feature is disabled by default.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов