Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 434

Страница: 434 / 521

Chapter 13: Statistics

Altitude

4000 Series Access Point System Reference Guide

434

The

Clients by Radio Type

bar graph displays the total number of clients by their IEEE 802.11 radio

type.

The

Clients by Channel

pie charts display the channels used by clients on 5GHz and 2.4GHz radios.

Access Points

“RF Domain”

The RF Domain

Access Points

screen displays hardware data collectively for all the access point’s within

the RF Domain. Data is only collected from access points of the same model.

To display RF Domain access point statistics:

Select the

Statistics

menu from the Web UI.

Select the

default

item from under the System node on the top, left-hand side, of the screen.

Select

Access Points

from the RF Domain menu.

MAC Address

Displays the

Media Access Control

(MAC) address of the RF Domain

member access point. Each listed MAC address can be selected to
display the access point’s device information in greater detail.

Location

Displays the physical location each RF Domain member access point is
deployed.

Radio Type

Displays the radio type of each listed RF Domain member access point.

WLAN Name

Displays the RF Domain member access point WLAN name to which this
high client count is associated.

Radio

Displays the total number of radios for each listed WLAN within the
access point RF Domain.

Clients

Displays the total number of clients associated with each listed WLAN
within the access point RF Domain.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Результаты поиска

Содержание Altitude 4000 Series

Отзывы:

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 434 / 521

Результаты поиска

Содержание Altitude 4000 Series

Отзывы: