Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 310 / 521

Chapter 8: Security Configuration
Altitude
TM
4000 Series Access Point System Reference Guide
310
●
Locationing - Administrators can define the location of wireless clients as they move throughout a
site. This allows for the removal of potential rogues though the identification and removal of their
connected Access Points.
●
WEP Cloaking - WEP Cloaking protects organizations using the Wired Equivalent Privacy (WEP)
security standard to protect networks from common attempts used to crack encryption keys.
To define an access point’s WIPS configuration:
1 Select Configuration > Security > Wireless IPS.
The Wireless IPS screen displays the Settings tab by default.
2
Select the Activate Firewall IPS Policy option on the upper left-hand side of the screen to enable the
screen’s parameters for configuration. Ensure this option stays selected to apply the configuration to
the access point profile.
3
Within the Wireless IPS Status field, select either the Enabled or Disabled to activate or de-activate
WIPS. The default setting is enabled.
4
Enter an Interval to Throttle Packets in either Seconds (1 - 86,400), Minutes (1 - 1,400), Hours (1 - 24) or
Days (1). This interval represents the duration event duplicates are not stored in history. The default
setting is 120 seconds.
5
Refer to the Rogue AP Detection field to define the following detection settings for this WIPS policy:
Enable Rogue AP
Detection
Select the checkbox to enable the detection of unsanctioned APs from
this WIPS policy. The default setting is disabled.