Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 374 / 521

Chapter 10: Management Access Policy Configuration
Altitude
TM
4000 Series Access Point System Reference Guide
374
6 Set the following FTP parameters:
7 Set the following General parameters:
8 Set the following Access Restrictions :
9 Select OK to update the access control configuration. Select Reset to revert to the last saved
configuration.
Setting the Authentication Configuration
“Management Access Policy Configuration”
As part of the access point’s Management Policy, define how client authentication requests are validated
using either an external or internal authentication resource:
To configure an authentication resource:
1 Select Configuration > Management .
2 Select Authentication from the list of Management Policy options in the upper, left-hand, side of the
UI.
Enable FTP Select the checkbox to enable FTP device access. FTP ( File Transfer
Protocol ) is the standard protocol for transferring files over a TCP/IP
network. FTP requires administrators enter a valid username and
password authenticated locally on the controller. FTP access is disabled
by default.
FTP Username Specify a username required when logging in to the FTP server. The
username cannot exceed 32 characters.
FTP Password Specify a password required when logging in to the FTP server.
Reconfirm the password in the field provided to ensure it has been
entered correctly. The password cannot exceed 63 characters.
FTP Root Directory Provide the complete path to the root directory in the space provided.
The default setting has the root directory set to flash:/
Idle Session Timeout Specify an inactivity timeout for management connects (in seconds)
between 0 - 1,440. The default setting is 120.
Message of the Day Enter message of the day text to be displayed at login for clients
connecting via Telnet or SSH.
Filter Type Use the drop-down menu to select the filter mechanism used as the
management policy access restriction. Options include
source-address ,
ip-access-list and None .
IP Access List Use the drop-down menu to select an existing list of IP addresses used
to control connection access to the access point. A default list is
available, or a new list can be created by selecting the
Create icon. An
existing list can also be modified by selecting the Edit icon.
Source Hosts Set multiple source host IP address resources.
Source Subnets Define a list of subnets allowed administrative access. Use the Clear link
to the right of each host if wishing to remove that IP address.
Logging Policy Use the drop-down menu to set the logging policy for administrative
access. Select from
None , denied-onl y (logs denied requests only) and
All (logs all requests).