manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 311 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 311

 

Wireless IPS (WIPS)

Altitude

TM

 4000 Series Access Point System Reference Guide

311

6

Select 

OK

 to update the settings. Select 

Reset

 to revert to the last saved configuration. The WIPS 

policy can be invoked at any point in the configuration process by selecting 

Activate Wireless IPS 

Policy

 from the upper, left-hand side, of the access point user interface.

7

Select the 

WIPS Events

 tab. Ensure the 

Activate Wireless IPS Policy

 option remains selected to enable 

the screen’s configuration parameters.

The

 Excessive 

tab displays by default, with additional 

MU Anomaly

 and 

AP Anomaly

 tabs also 

available.

The Excessive tab lists events with the potential of impacting network performance. An 
administrator can enable or disable event filtering and set the thresholds for the generation of the 
event notification and filtering action.

An 

Excessive Action Event

 is an event where an action is performed repetitively and continuously. 

DoS attacks come under this category. Use the 

Excessive Action Events 

table to select and configure 

the action taken when events are triggered.

8

Set the configurations of the following 

Excessive Action Events

:

Wait Time to 
Determine AP Status

Define a wait time in either 

Seconds

 (10 - 600) or

 Minutes

 (0 - 10) before 

a detected AP is interpreted as a rogue (unsanctioned) device, and 
potentially removed. The default interval is 1 minute.

Ageout for AP 
Entries

Set the interval the WIPS policy uses to ageout rogue devices. Set the 
policy in either 

Seconds

 (30 - 86,400), 

Minutes

 (0- 1,440), 

Hours

 (1 - 24) 

or 

Days

 (1). The default setting is 5 minutes.

Name

Displays the name of the excessive action event. This column lists the 
event being tracked against the defined thresholds set for interpreting the 
event as excessive or permitted.

Enable

Displays whether tracking is enabled for each event. Use the drop-down 
menu to enable/disable events as required. A green checkmark defines 
the event as enabled for tracking against its threshold values. A red “X” 
defines the event as disabled and not tracked by the WIPS policy. Each 
event is disabled by default.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов