Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 447

Страница: 447 / 521

RF Domain

Altitude

4000 Series Access Point System Reference Guide

447

This WIPS

Client Blacklist

displays the following:

WIPS Events

“WIPS”

Refer to the WIPS Events screen to assess WIPS events reported by RF Domain member access points.

To view the rogue access point statistics:

Select the

Statistics

menu from the Web UI.

Select the

default

item from under the System node on the top, left-hand side, of the screen.

Expand the

WIPS

menu item and select

WIPS Events.

Event Name

Displays the name of the wireless intrusion event detected by a RF Domain
member access point.

Blacklisted Client

Displays the MAC address of the unauthorized device intruding the RF
Domain,

Time Blacklisted

Displays the time when the wireless client was blacklisted by a RF Domain
member access point.

Total Time

Displays the time the unauthorized (now blacklisted) device remained in the
WLAN.

Time Left

Displays the time the blacklisted client remains on the list.

Refresh

Select the

Refresh

button to update the statistics counters to their latest

values.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Результаты поиска

Содержание Altitude 4000 Series

Отзывы:

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 447 / 521

Результаты поиска

Содержание Altitude 4000 Series

Отзывы: