Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 474

Страница: 474 / 521

Chapter 13: Statistics

Altitude

4000 Series Access Point System Reference Guide

474

The

Specification

field displays the following:

The

Traffic

field describes the following for the selected access point interface:

Index

Displays the unique numerical identifier supporting the interface.

Access VLAN

Displays the interface the VLAN can access.

Access Setting

Displays the mode of the VLAN as either

Access

Trunk

Administrative
Status

Displays whether the interface is currently

true

false

Media Type

Displays the physical connection type of the interface.

Medium types are:

Copper

- Used on RJ-45 Ethernet ports

Optical

- Used on fibre optic gigabit Ethernet ports

Protocol

Displays the name of the routing protocol adopted by the selected interface.

MTU

Displays the

maximum transmission unit

(MTU) setting configured on the

interface. The MTU value represents the largest packet size that can be
sent over a link. 10/100 Ethernet ports have a maximum setting of 1500.

Mode

The mode can be either:

Access

– This Ethernet interface accepts packets only from the native

VLANs.

Trunk

– This Ethernet interface allows packets from a given list of VLANs

that you can add to the trunk.

Metric

Displays the metric value associated with the route through the selected
interface.

Maximum Speed

Displays the maximum speed at which the selected interface transmits or
receives data.

Admin. Speed

Displays the speed setting used when using the administrative interface.

Operator Speed

Displays the current speed of the data transmitted and received over the
interface.

Admin. Duplex
Setting

Displays the administrator’s duplex setting.

Current Duplex
Setting

Displays the interface as either half duplex, full duplex, or unknown.

Good Octets Sent

Displays the number of transmitted octets (bytes) with no errors.

Good Octets
Received

Displays the number of octets (bytes) with no errors received by the
interface.

Good Pkts Sent

Describes the number of good packets transmitted.

Good Pkts
Received

Describes the number of good packets received.

Mcast Pkts Sent

Displays the number of multicast packets sent through the selected
interface.

Mcast Pkts
Received

Displays the number of multicast packets received through the selected
interface.

Bcast Pkts Sent

Displays the number of broadcast packets sent through the interface.

Bcast Pkts
Received

Displays the number of broadcast packets received through the interface.

Packet Fragments

Displays the number of packet fragments transmitted or received through
the interface.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Результаты поиска

Содержание Altitude 4000 Series

Отзывы:

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 474 / 521

Результаты поиска

Содержание Altitude 4000 Series

Отзывы: