Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 130 / 521

Chapter 6: Device Configuration
Altitude
TM
4000 Series Access Point System Reference Guide
130
10 Set the following parameters to add or modify MINT VLAN configuration:
11 Select OK to save the updates to the MINT Protocol configuration. Select Reset to revert to the last
saved configuration.
Advanced Profile Miscellaneous Configuration
“Advanced Profile Configuration”
Refer to the advanced profile’s Miscellaneous menu item to set the profile’s NAS configuration. The
profile database on the RADIUS server consists of user profiles for each connected network access
server (NAS) port. Each profile is matched to a username representing a physical port. When the
wireless controller authorizes users, it queries the user profile database using a username representative
of the physical NAS port making the connection.
VLAN If adding a new VLAN, define a VLAN ID between 1 - 4,094 used by
peers for interoperation when supporting the MINT protocol.
Routing Level If adding a new VLAN, use the spinner control to define a routing level of
either 1 or 2.
Link Cost Use the spinner control to define a link cost between 1 - 10,000. The
default value is 100.
Hello Packet Interval Set an interval in either Seconds (1 - 120) or Minutes (1 - 2) for the
transmission of hello packets. The default interval is 4 seconds.
Adjacency Hold Time Set a hold time interval in either Seconds (2 - 600) or Minutes (1 - 10) for
the transmission of hello packets. The default interval is 13 seconds.