Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 177 / 521

Adoption Overrides
Altitude
TM
4000 Series Access Point System Reference Guide
177
22 Refer to the Aggregate MAC Protocol Data Unit (A-MPDU) field to define or override how MAC
service frames are aggregated by the access point radio.
23 Use the Aggregate MAC Service Data Unit (A-MSDU) drop-down menu to set or override the
supported A-MSDU mode.
Available modes include Receive Only and Transmit and Receive. Using Transmit and Receive,
frames up to 4 KB can be sent and received. The buffer limit is not configurable.
24 Define a Reduced Interframe Spacing (RIFS) mode using the drop-down menu. This value determines
whether interframe spacing is applied to transmissions or received packets, or both or none. The
default mode is Transmit and Receive.
Consider setting this value to None for high priority traffic to reduce packet delay.
A-MPDU Modes Use the drop-down menu to define the A-MPDU mode. Options include
Transmit Only, Receive Only, Transmit and Receive and None. The default
value is Transmit and Receive. Using the default value, long frames can be
both sent and received (up to 64 KB). When enabled, define either a
transmit or receive limit (or both).
Minimum Gap Between
Frames Use the drop-down menu to define the minimum gap between A-MPDU
frames (in microseconds). The default value is 4 microseconds.
Received Frame Size
Limit If a support mode is enable allowing A-MPDU frames to be received, define
an advertised maximum limit for received A-MPDU aggregated frames.
Options include 8191, 16383, 32767 or 65535 bytes. The default value is
65535 bytes.
Transmit Frame Size
Limit Use the spinner control to set limit on transmitted A-MPDU aggregated
frames. The available range is between 0 - 65,535 bytes). The default value
is 65535 bytes.