Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 465 / 521

Access Point Statistics
Altitude
TM
4000 Series Access Point System Reference Guide
465
4 The Access Point Critical Resource screen displays the following:
Radios
“Access Point Statistics”
The Radio statistics screens display information on access point radios. The actual number of radios
depend on the access point model and type. This screen displays information on a per radio basis. Use
this information to refine and optimize the performance of each radio and therefore improve network
performance.
The access point’s radio statistics screens provide details about associated radios. It provides radio ID,
radio type, RF quality index etc. Use this information to assess the overall health of radio transmissions
and access point placement. An Altitude 4700 model access point can support from 2-3 radios
IP Address
Lists the IP address of the critical resource. This is the address the device
assigned and is used by the access point to ensure the critical resource is
available.
VLAN
Lists the access point VLAN on which the critical resource is available.
Ping Mode
Describes the ping mode as either:
arp-only – Uses the Address Resolution Protocol (ARP) for only pinging the
critical resource. ARP is used to resolve hardware addresses when only the
network layer address is known.
arp-icmp – Uses both ARP and Internet Control Message Protoco l (ICMP)
for pining the critical resource and sending control messages (device not
reachable, requested service not available, etc.).
State
Defines the operational state of each listed critical resource.
Refresh
Select the Refresh button to update the screen’s statistics counters to their
latest values.