manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 347 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 347

 

Setting the DHCP Server Configuration

Altitude

TM

 4000 Series Access Point System Reference Guide

347

17

The addition or edit of the network pool’s advanced settings requires the following 

General

 

parameters be set:

18

Set the following 

NetBIOS

 parameters for the network pool:

Boot File

Enter the name of the boot file used with this pool. Boot files (Boot 
Protocol) can be used to boot remote systems over the network. BOOTP 
messages are encapsulated inside UDP messages so requests and 
replies can be forwarded. Each pool can use a different file as needed.

BOOTP Next Server

Provide the numerical IP address of the server providing BOOTP 
resources.

Enable Unicast

Unicast packets are sent from one location to another location (there's 
just one sender, and one receiver). Select this option to forward unicast 
messages to just a single device within the network pool. 

NetBIOS Node Type

Set the NetBIOS Node Type used with this pool. The following types are 
available: 
Broadcast - Uses broadcasting to query nodes on the network for the owner 
of a NetBIOS name. 

Peer-to-Peer 

- Uses directed calls to communicate with a known NetBIOS 

name server, such as a WINS server, for the IP address of a NetBIOS 
machine. 

Mixed 

- Is a mixed node using broadcasted queries to find a node, and 

failing that, queries a known p-node name server for the address. 

Hybrid

 - Is a combination of two or more nodes.

Undefined

 - No NetBIOS Node Type is used. 

NetBIOS Servers

Specify a numerical IP address of a single or group of NetBIOS WINS 
servers available to DHCP supported wireless clients.   

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов