manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 269 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 269

 

Radio QoS Policy

Altitude

TM

 4000 Series Access Point System Reference Guide

269

8

Select 

OK

 when completed to update the radio QoS settings for this policy. Select 

Reset

 to revert the 

WMM screen back to its last saved configuration.

9

Select the 

Admission Control 

tab to configure an admission control configuration for selected radio 

QoS policy. Admission control requires clients send their 

traffic specifications

 (TSPEC) to a managed 

Access Point before they can transmit or receive data within the managed network.

The name of the Radio QoS policy for which the admission control settings apply displays in the 
banner of the QoS Policy screen.

10

Select the 

Enable admission control for firewall Detected Traffic (e.g, SIP)

 check box to apply Radio QoS 

settings to traffic detected by the access point’s Firewall. This feature is enabled by default.

11

Select the 

Implicit TPSEC

 check box to require wireless clients to send their traffic specifications to 

the access point before they can transmit or receive data. This feature is enabled by default. 

12

Set the following 

Voice Access

 admission control settings for the radio QoS policy:

Enable Voice

Select the check box to enable admission control for voice traffic. Only 
voice traffic admission control is enabled, not any of the other access 
categories (each access category must be separately enabled and 
configured). The default is disabled.

Maximum Airtime

Set the maximum airtime (in the form of a percentage of the radio’s 
bandwidth) allotted to admission control for voice supported client traffic. 
The available percentage range is from 0-150%, with 150% being 
available to account for over-subscription. This value helps ensure the 
radio’s bandwidth is available for high bandwidth voice traffic (if 
anticipated on the wireless medium) or other access category traffic if 
voice support is not prioritized. Voice traffic requires longer radio airtime 
to process, so set a longer airtime value if the radio is intended to 
support voice. The default is 75.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов