manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 207 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 207

 

Adoption Overrides

Altitude

TM

 4000 Series Access Point System Reference Guide

207

8

Use the 

Configure 

drop-down menu within the Persist Configuration Across Reloads field to define 

whether the access point saves a configuration received from a Virtual Controller AP to flash 
memory. The configuration would then be made available if the this access point reboots and the 
Virtual Controller AP is not reachable. Options include Enabled, Disabled and secure.

9

Select

 OK

 to save the changes and overrides made to the profile’s Management Settings. Select 

Reset 

to revert to the last saved configuration.

10

Select the 

Firmware 

tab from the Management menu.

11

 

Refer to the 

Auto Install via DHCP Option 

field to define automatic configuration file and firmware 

updates. 

Username for SMTP 
Server

Specify the username of the sender on the outgoing SMTP server. Many 
SMTP servers require users to authenticate with an username and 
password before sending e-mail through the server.

Password for SMTP 
Server

Specify the password associated with the username of the sender on the 
outgoing SMTP server. Many SMTP servers require users to authenticate 
with an username and password before sending e-mail through the 
server.

Enable Configuration 
Update

Select the Enable Configuration Update check box to enable automatic 
configuration file updates for the controller profile from a location external 
to the access point. 

If enabled (the setting is disabled by default), provide a complete path to 
the target configuration file used in the update.

Enable Firmware Update

Select this option to enable automatic firmware upgrades from a user 
defined remote location. This value is disabled by default.

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов