manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 250 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 250

 

Chapter 7: Wireless Configuration

Altitude

TM

 4000 Series Access Point System Reference Guide

250

Define both minimum 

Basic

 and 

Supported 

rates as required for the 802.11b rates, 802.11g rates and 

802.11n rates supported by the 2.4 GHz band and 802.11a and 802.11n rates supported by the 5.0 
GHz radio band. These are the rates wireless client traffic is supported within this WLAN.

If supporting 802.11n, select a Supported MCS index. Set a MCS (modulation and coding scheme) in 
respect to the radio’s channel width and guard interval. A MCS defines (based on RF channel 
conditions) an optimal combination of 8 data rates, bonded channels, multiple spatial streams, 
different guard intervals and modulation types. Clients can associate as long as they support basic 
MCS (as well as non-11n basic rates).

The selected rates apply to associated client traffic within this WLAN only.

6

Select 

OK

 when completed to update this WLAN’s Advanced settings. Select 

Reset 

to revert to the 

last saved configuration.

Configuring WLAN QoS Policies

“Wireless LANs”

QoS provides a data traffic prioritization scheme. QoS reduces congestion from excessive traffic. If there 
is enough bandwidth for all users and applications (unlikely because excessive bandwidth comes at a 
very high cost), then applying QoS has very little value. QoS provides policy enforcement for mission-
critical applications and/or users that have critical bandwidth requirements when bandwidth is shared 
by different users and applications.

QoS helps ensure each WLAN receives a fair share of the overall bandwidth, either equally or the 
proportion configured. Packets directed towards clients are classified into categories such as Video, 

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов