manualshive.com logo in svg

Extreme Networks Altitude 4000 Series, Справочное руководство, Страница: 511 / 521

Поделиться
Скачать
Extreme Networks Altitude 4000 Series Скачать руководство пользователя страница 511

 

Wireless Client Statistics

Altitude

TM

 4000 Series Access Point System Reference Guide

511

The 

User Details

 field displays the following:

The 

Connection

 field displays the following:

The 

Association

 field displays the following:

The 

802.11 Protocol

 field displays the following:

Username

Displays the unique name of the administrator or operator managing the 
client’s connected access point.

Authentication

Lists the authentication scheme applied to the client for interoperation with 
the access point. 

Encryption

Lists the encryption scheme applied to the client for interoperation with the 
access point. 

Captive Portal 
Auth.

Displays whether captive portal authentication is enabled (

True 

of 

False

).

Idle Time

Displays the time for which the wireless client remained idle.

Last Active

Displays the time in seconds the wireless client was last in contact with its 
connected access point.

Last Association

Displays the duration the wireless client was in association with its 
connected access point. 

Session Time

Displays the duration for which a session can be maintained by the wireless 
client without it being dis-associated from the access point.

SM Power Save 
Mode

Displays whether this feature is enabled on the wireless client. The 

spatial 

multiplexing

 (SM) power save mode allows an 802.11n client to power 

down all but one of its radios. This power save mode has two sub modes of 
operation: 

static operation

 and 

dynamic operation

.

Power Save Mode

Displays whether this feature is enabled or not. To prolong battery life, the 
802.11 standard defines an optional Power Save Mode, which is available 
on most 80211 clients. End users can simply turn it on or off via the card 
driver or configuration tool. With power save off, the 802.11 network card is 
generally in receive mode listening for packets and occasionally in transmit 
mode when sending packets. These modes require the 802.11 NIC to keep 
most circuits powered-up and ready for operation.

WMM Support

Displays whether WMM is enabled or not in order to provide data packet 
type prioritization between the access point and connected client.

40 MHz Capable

Displays whether the wireless client has channels operating at 40 MHz. 

Max Physical Rate

Displays the maximum data rate at the physical layer.

Max User Rate

Displays the maximum permitted user data rate.

AP

Displays the MAC address of the wireless client connected access point.

BSS

Displays the basic service set the access point belongs to. A BSS is a set 
of stations that can communicate with one another.

Radio Number

Displays the access point radio the wireless client is connected to.

Radio Type

Displays the radio type. The radio can be 802.11b, 802.11bg, 802.11bgn, 
802.11a or 802.11an.

Rate

Displays the permitted data rate for access point and client interoperation.

High-Throughput

Displays whether high throughput is supported. High throughput is a 
measure of the successful packet delivery over a communication channel.

RIFS

Displays whether this feature is supported. RIFS is a required 802.11n 
feature that improves performance by reducing the amount of dead time 
between OFDM transmissions. 

Содержание Altitude 4000 Series










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов